Introducing the M-SS, MS-SS and MLP-SS. These new products contain a Stop Switch (Zero Speed) sensor which will broaden the versatility for motion detection on your equipment.
These new switches use the same “magnetic attachment” design as the rest of the MS family. They also have identical dimensions of the MS1 and MS1-LP.
The only difference is that these new switches provide a constant or “high” signal when the equipment being monitored is operational and a zero or “low” output when the equipment is off.
The M-SS and MLP-SS operate on 20 to 132 v AC, and 2 wire configuration. A 2 second start up delay and 4 second shut down delay are standard. Since the sensor is completely programmable, start up and shut down time delays can be programmed for custom applications.

A full spec sheet link can be found at the bottom of this page.

Benefits of these 2 new products could include the following:

1. No PLC programming is necessary 2. Eliminate the Watchdog Timer 3. Directly attaches to standard relays for indication 4. Useful in “ interlocking “ of equipment. 5. Can be used for “speed sensing” whereby “under speed” and “over speed”   can be detected. 6. Completely programmable 7. Available in AC 2 wire, DC 3 wire and unique DC 4 wire with complementary (N.O/N.C.) or dual N.O. outputs.

The M-SS and MLP-SS, added to the rest of the MS speed switch family, creates a full line of motion detection options. Applied Innovative Solutions, LLC is proud to include these two great products into our lineup. We are striving to become your one source when it comes to motion and speed detection.

For a complete specification sheet on the sensor used in the new M-SS, MS-SS and MLP-SS products, click here.